Brief CV
Javad Akbardoost
Associate professor of mechanical engineering
Research of Interest: Fracture Mechanics, Size effect in fracture mechanics, Mixed mode fracture in cracked and notched specimens.
Summary of Scientific and Research Activities:
Publishing more than 35 journal papers (more than 30 ISI paper),
Publishing more than 26 conference proceedings.
Supervising more than 5 B.Sc. theses ,
Supervising and Advising more than 25 M.Sc. theses ,
Advising 2 Ph.D. theses ,
Associate professor of mechanical engineering
Research of Interest: Fracture Mechanics, Size effect in fracture mechanics, Mixed mode fracture in cracked and notched specimens.
Summary of Scientific and Research Activities:
Publishing more than 35 journal papers (more than 30 ISI paper),
Publishing more than 26 conference proceedings.
Supervising more than 5 B.Sc. theses ,
Supervising and Advising more than 25 M.Sc. theses ,
Advising 2 Ph.D. theses ,
Educational records
#
Course
University
City
Country
Graduation Date
Total mean
1
M.Sc.
Iran University of Science and Technology
Tehran
Iran
February 2008
2
B.Sc.
Iran University of Science and Technology
Tehran
Iran
September 2005
3
Ph.D.
Iran University of Science and Technology
Tehran
Iran
September 2012
Executive Activities
#
Executive Activities Titles
Name of Organization / comment
Starting Date
Termination Date
1
Research interests
#
Title
Start date
1
Theoretical and experimental fracture mechanics
2
Numerical Stress Analysis
3
High Strain Rate Problems
4
Experimental Solid Mechanics
Theses supervised
#
Title
Persons
1
Fracture analysis of rock specimens weakened by Sharp V-notches under mixed mode I/II loading
A. Arabnia
2
Fracture analysis of rock U-shaped notch under mix mode I/II loading with SED criterion
N. Godarzi
3
fracture investigation of rock fragments with U- shaped notch under compression - shear loading
P. Makvandi
4
Investigating the mixed-mode fracture of orthotropic materials using an energy-based criterion
H. Ali Mohammadi
5
Calculating the coefficients of stress terms around the crack tip in orthotropic materials
M. J. Jafari
6
Study of the effect of using concrete wash water from tracks mixer and batching plant on the properties of concrete ductility and Concrete Fracture toughness and Comparison with Conventional Concrete and Fiber concrete
M. Taghizade
7
Investigating the effect of the waist foundry sand on fracture toughness of concrete
M. Aslani
8
investigation of Fracture trajectory in Rock spesimens containing U-shaped notched under mixed mode I/II loading.
L. Safari
9
investigation of brittle fracture in cracked-component under compression-shear
M. Tahmasebi
10
characterizing the stress field around crack tip in orthotropic media
O. Mohsenzadeh
11
Investigating the effects of treated wastewater on the Fracture Toughness of the concrete
F. S. Peyghambarzadeh
12
3-D dynamic modeling of projectile in tube
A. Masoumi
13
size effect on fracture resistance of cracked parts under pure mode III loading
J. Bidadi
14
Size effects on the mode I fracture resistance of V-notched specimens
A. R. Zhaleh
15
Size effects on the mixed mode I/II fracture résistance of U-notched specimen
M. Mesbah
16
size effect on fracture toughness of bone
R. Amirafshari
17
Size effect on fracture resistance of U-shaped notches under pure mode I loading
H. R. Ghadiriyan
18
Geometry effect on fracture behavior of concrete under pure mode one.
M. H. Mohajerani
19
Investigation on the compressive behavior of carbon nanotube reinforced epoxy under moderately strain rates
M. Emdadi
20
Size effect on the prediction of the fracture trajectory in quasi-brittle materials.
A. Rastin
21
Analysis of a New Specimen for Conducting Fracture Experiments Under pure
Mode III
محمدرضا اکبری
22
Fracture analysis of rock specimens weakened by Rounded Tip V-notches under mixed mode I/II loading
حمیدرضا شیبانی
23
Study of the effect of chemical oxygen demand on domestic wastewater in mechanical resistance and durability of self-compacting concrete
الهام جهاندیده
24
Investigation of the effect of partial replacement of waste foundry sand instead of fine aggregate in concrete on fracture toughness under mixed mode I/II loading
محمدمهدی پاک سرشت
25
Fracture analysis of rock specimens weakened by U-notches under pure mode III loading
رویا اتش زای
26
Predicting a strain-based criterion for resistance fracture analysis of rock speciment weakened by U-notches under mixed-mode I/II loading
غزل لعلی
27
Fracture Toughness Evaluation of Single and Hybrid Reinforcements of PMMA Denture Base and Elucidating Their Toughening Mechanisms
دانیال فرج پور
Theses advised
#
Title
Persons
1
Effect of pH on the use of domestic sewage on the workability, mechanical properties of self-compacting concrete
Sh. Keneshlo
2
Feasibility study of producing of Self Compacting Mortar using municipal solid waste incinerator ash and concrete wash water from tracks mixer and batching plant
E. Abdi
3
Transient analysis of a cracked rotor passing through critical speeds
H. Maral Alvandi
4
Study of effect of using treated industrial wastewater and the plastic waste fibers (metallized plastic) on the mechanical properties and durability of self-compacting concrete (SCC)
مریم شاطر
5
effect of using polypropylene fibers and treated industrial wastewater on the mechanical properties and durability of self-compacting concrete (SCC)
سمیه مفاخری
Published articles
#
Paper title
Writer
Magazine title
Publish year
Publish type
Article type
1
The effect of using treated domestic wastewater with different pHs on workability, mechanical, and durability properties of self-compacting concrete
SHIRIN KENESHLO, Gholam reza Asadolah fardi, PEYMAN HOMAMI, Amir Masoud Salehi, Javad Akbardoost, Mojtaba Tayebi jebelli
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
2024
Full Text
2
The Effect of Chemical Oxygen Demand of Domestic Wastewater on Workability, Mechanical, and Durability of Self- compacting Concrete
Elham Jahandideh, Gholam reza Asadolah fardi, Javad Akbardoost, Amir Masoud Salehi
Case Studies in Construction Materials
2024
Full Text
3
A new strain-based approach to investigate the size and geometry effects on fracture resistance of rocks
Mahya Aghabeigi, Majid Reza Ayatollahi, Javad Akbardoost
THEORETICAL AND APPLIED FRACTURE MECHANICS
2024
Full Text
4
A strain-based criterion for predicting size-dependent fracture resistance of quasi-brittle materials under mixed mode loading
Mahya Aghabeigi, Javad Akbardoost, Majid Reza Ayatollahi
ENGINEERING FRACTURE MECHANICS
2024
Full Text
5
A Modified Mean Stress Criterion for Considering Size Effects on Mode I Fracture Estimation of Rounded-Tip V-Notched Polymeric Specimens
Ali Reza Torabi, Mahdi Jabbari, Javad Akbardoost, Sergio Cicero
Polymers
2022
Full Text
6
Size Effect on Mode I Fracture Resistance of Polymeric Rounded-Tip V-Notched Specimens Using the Modified Point Stress Criterion
M. Jabbari, Javad Akbardoost, A. R. Torabi
JOURNAL OF ENGINEERING MECHANICS
2022
Full Text
7
A stress-based approach for considering the size effect on the mixed mode fracture behavior of rock
Maryam Aslani ghasem abadiyan, Javad Akbardoost, Filippo Berto
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
2022
Full Text
8
Development of maximum tangential strain (MTSN) criterion for prediction of mixed-mode I/III brittle fracture
Jamal Bidadi, M.R.M. Aliha, Javad Akbardoost
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
2022
Full Text
9
Mixed Mode Fracture Investigation of Rock Specimens Containing Sharp V-Notches
Ali Arabnia, Javad Akbardoost, Sergio Cicero, Ali Reza Torabi
Materials
2022
Full Text
10
Mixed-Mode I/II Fracture Load Prediction in Cracked Rock Geometries Using the Tangential Stress Contour (TSC) Method
Jamal Bidadi, Javad Akbardoost, Mohamad R. M. Aliha, Hamed Saeidi Googarchin, Alireza Akhavan-Safar, Lucas F. M. da Silva
1st International Conference on Mechanics of Solids 2022
2022
Full Text
11
Feasibility Study of Reusing Wash Water and Steel Fibre Simultaneously on Workability, Mechanical Properties and Fracture Toughness of Concrete
Maryam Taghizadeh, Gholam reza Asadolah fardi, Amir Masoud Salehi, Javad Akbardoost
Australian Journal of Civil Engineering
2021
Full Text
12
Investigating the effect of the foundry sand and waste foundry sand on the fracture toughness of concrete
Maryam Aslani ghasem abadiyan, Javad Akbardoost, Mohammad Delnavaz
Arabian Journal of Geosciences
2021
Full Text
13
Assessment of mode I fracture of rock-type sharp V-notched samples considering the size effect
Milad Sangsefidi, Javad Akbardoost, Alireza Zhaleh
THEORETICAL AND APPLIED FRACTURE MECHANICS
2021
Full Text
14
Thickness effect on the mode III fracture resistance and fracture path of rock using ENDB specimens
Jamal Bidadi, Javad Akbardoost, Mohammad Reza Mohammad Aliha
FATIGUE and FRACTURE OF ENGINEERING MATERIALS and STRUCTURES
2020
Full Text
15
The effects of using treated wastewater on the fracture toughness of the concrete
Fahimeh sadat Peighambarzadeh, Gholam reza Asadolah fardi, Javad Akbardoost
Australian Journal of Civil Engineering
2020
Full Text
16
Experimental and theoretical fracture assessment of rock-type U-notched specimens under mixed mode I/II loading
Milad Sangsefidi, Javad Akbardoost, Mostafa Mesbah
ENGINEERING FRACTURE MECHANICS
2020
Full Text
17
Implementation of XFEM for fracture prediction of VO-notched brittle specimens
A.R. Torabi, H.R. Majidi, H. Amani, Javad Akbardoost
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
2020
Full Text
18
Scaling effects on notch fracture toughness of graphite specimens under mode I loading
A.R. Torabi, M. Jabbari, Javad Akbardoost
ENGINEERING FRACTURE MECHANICS
2020
Full Text
19
Mixed mode notch fracture toughness assessment of quasi-brittle polymeric specimens at different scales
A.R. Torabi, M. Jabbari, Javad Akbardoost
THEORETICAL AND APPLIED FRACTURE MECHANICS
2020
Full Text
20
Fracture analysis of rock specimens weakened by rounded-V and U-shaped notches under pure mode I loading
Hamidreza Ghadirian, Javad Akbardoost, Alireza Zhaleh
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
2019
Full Text
21
Scaling effect on the fracture toughness of bone materials using MMTS criterion
Javad Akbardoost, Reza Amirafshari, Omid Mohsenzade kia abaadi, Filippo Berto
Journal of the Mechanical Behavior of Biomedical Materials
2018
Full Text
22
Predicting the fracture trajectory in U VO and key-hole notched specimens using an incremental approach
Javad Akbardoost, A.R. Torabi, H. Amani
ENGINEERING FRACTURE MECHANICS
2018
Full Text
23
Evaluation of size effect on mixed-mode fracture behavior of epoxy/silica nanocomposites
Ahmad Ghasemi, Javad Akbardoost, Yaser Ghaffari
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
2017
Full Text
24
Averaged strain energy density criterion to predict ductile failure of U-notched Al 6061-T6 plates under mixed mode loading
Ali Reza Torabi, Fillpo Berto, A. Campagnolo, Javad Akbardoost
THEORETICAL AND APPLIED FRACTURE MECHANICS
2017
Full Text
25
Calculation of the crack tip parameters in the holed-cracked flattened Brazilian disk (HCFBD) specimens under wide range of mixed mode I/II loading
Javad Akbardoost, Hamidreza Ghadirian, Milad Sangsefidi
FATIGUE and FRACTURE OF ENGINEERING MATERIALS and STRUCTURES
2017
Full Text
26
Size effects on mixed-mode fracture behavior of polygranular graphite
M.R. Ayatollahi, Javad Akbardoost, F. Berto
CARBON
2016
Full Text
27
Scaling effect on the mixed-mode fracture path of rock materials
Javad Akbardoost, A. Rastin
Physical Mesomechanics
2016
Full Text
28
Comprehensive data for calculating the higher order terms of crack tip stress field in disk-type specimens under mixed mode loading
Javad Akbardoost, A. Rastin
THEORETICAL AND APPLIED FRACTURE MECHANICS
2015
Full Text
29
Size and Geometry Effects on Rock Fracture Toughness Mode I Fracture
M.R Ayatollahi, Javad Akbardoost
ROCK MECHANICS AND ROCK ENGINEERING
2014
Full Text
30
Size effects on parameters of cohesive zone model in mode I fracture of limestone
H. Khoramishad, Javad Akbardoost, M. Ayatollahi
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS
2014
Full Text
31
Size-dependent fracture behavior of Guiting limestone under mixed mode loading
Javad Akbardoost, M.R. Ayatollahi, M.R.M. Aliha, M.J. Pavier, D.J. Smith
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
2014
Full Text
32
Experimental analysis of mixed mode crack propagation in brittle rocks The effect of non-singular terms
Javad Akbardoost, M.R. Ayatollahi
ENGINEERING FRACTURE MECHANICS
2014
Full Text
33
Size and crack length effects on fracture toughness of polycrystalline graphite
Javad Akbardoost
Engineering Solid Mechanics
2014
Full Text
34
Size effects in mode II brittle fracture of rocks
M.R Ayatollahi, Javad Akbardoost
ENGINEERING FRACTURE MECHANICS
2013
Full Text
35
Typical Upper Bound Lower Bound Mixed Mode Fracture Resistance Envelopes for Rock Material
Javad Akbardoost, M. R. Ayatollahi
ROCK MECHANICS AND ROCK ENGINEERING
2012
Full Text
36
Size effects on fracture toughness of quasi-brittle materials A new approach
M.R Ayatolahi, Javad Akbardoost
ENGINEERING FRACTURE MECHANICS
2012
Full Text
37
Using Municipal Solid-Waste Incinerator Fly Ash, Wash Water, and Propylene Fibers in Self-Compacting Repair Mortar, Greenhouse Gas Emissions Potential
Ehsan Abdi Asiabaraki, Gholam reza Asadolah fardi, Amirmasoud Salehi, Javad Akbardoost, Negar Esmaeili, Azadeh Panahandeh
International Journal of Concrete Structures and Materials
Full Text
Presented articles
#
Title
Writer
Conference
Date
Presentation type
1
Size effect on mode I fracture toughness of rock using the MTS-FEM criterion
Maryam Aslani ghasem abadiyan, Javad Akbardoost, Mohammad Reza Mohammad Aliha
Mediterranean Geosciences :union: annual meeting2021 - Turkey
1400/09/04
Oral